Name：Top in multi bag filter

Product Introduction：

Top in multi bag filter product introduction:

The multi bag bag filter adopts a side in and bottom out method (bottom in and bottom out method can also be used), which presses or draws the filter medium into the filter barrel through the pressure in the pipeline. The liquid medium to be filtered is filtered by the filter bag supported by the filter blue through electric polishing punching, producing ideal solid-liquid separation to achieve the effect of filtering the liquid medium. Different filtration accuracies depend on the filter bags of different accuracies. Due to the fact that the liquid medium enters the filter from the top of the filter bag, the liquid can be evenly distributed throughout the filtering surface of the filter bag, resulting in a basically constant and consistent fluid distribution throughout the entire layer. The negative impact of turbulence is minimal, and the filtering effect is good.

Multi bag and bag filters have many advantages such as reasonable structure, good sealing, strong flow capacity, and easy operation. Especially the probability of side leakage of the filter bag is small, which can accurately ensure the filtration accuracy and quickly replace the filter bag, reducing operating costs. The inner and outer surfaces of the filter are treated with mechanical sandblasting and polishing, which is uniform and easy to clean.

Filtering can also provide various forms of opening and closing devices such as manual suspension, hydraulic suspension, spring assisted suspension, and balance weights according to customer requirements to meet the needs of different customers. Bag filtration system, filter, filter bag, filter cartridge.

Top in multi bag filter specifications:

Model specifications: 2 * 3 * 4 * 5 * 6 * 8 * 10 * 12 * 14 * 16 * 18 * 20 * 22 * 24

Flow in method: side inlet and bottom outlet, bottom inlet and bottom outlet

Filter bag size: 180 (7 inches) * 820 (32 inches)

Maximum flow rate (m/h): 90~1080

Maximum operating pressure (MPa): 0.8~3.0

Standard connection (in/out): DN100~1000

Filter material: 304, 316, 316L