Stainless steel filters generally refer to filters with stainless steel body materials. Dazhang produces various types of stainless steel filters, including stainless steel single bag filters, stainless steel multi bag filters, stainless steel filter cartridges, stainless steel high flux filters, stainless steel intelligent automatic cleaning filters, stainless steel laminated precision filters, stainless steel plate frame multi-layer filters, stainless steel mechanical filters, and other types and models of filters.

Precautions for using stainless steel plate frame filter:

1. When using, rinse repeatedly with 3-5% sodium bicarbonate solution, then rinse with clean water, and disinfect with injection water. Measure the pH value to reach the allowable range.

2. Check if the silicone of the filter is placed flat to prevent water leakage. You can wet the thin filter material with distilled water and stick it to the mesh surface. Place the filter plate inside the silicone ring and press the top plate tightly.

3. When starting the infusion pump, first close the inlet valve, then start it, gradually open the required pressure of the ball valve, and discharge the air to filter. Generally, the pressure should not exceed 0.4Mpa.

4. When using, attention should be paid to the increase and sudden decrease of the pressure gauge to determine whether the filter material is blocked or broken.

5. When stopping the pump, the inlet valve should be closed first to prevent sudden pump stoppage and backflow of liquid from damaging the filter material. Then, stop the pump and tighten the vent bolt. Loosen the top plate to replace the filter material and clean it.