The titanium rod filter uses stainless steel as the shell and titanium rod as the internal filter element, which has the characteristics of high temperature resistance, high pressure, strong acid, strong alkali resistance, corrosion resistance, and repeated regeneration of the filter element. Porous titanium filter cartridge is made of high-purity titanium powder and sintered at high temperature. It is a deep filtration method with the characteristics of easy control of pore size, high porosity, and uniform pore size. The filter element has low filtration resistance, good permeability, high temperature resistance, corrosion resistance, long service life, and can be used for filtering various media.

What are the advantages of titanium rod filters?

1. When using titanium rod filters for solid-liquid separation (such as decarbonization), it is necessary to follow humanized operation and try to avoid collision of the filter element.

2. The main body of the titanium rod filter leaves enough space to accommodate activated carbon powder according to the actual amount of activated carbon. To avoid blocking the titanium rod filter element, which can lead to an increase in pressure difference and a decrease in flow rate, this can also save energy and reduce consumption.

3. The porous plate used for lifting filter cartridges adopts a thicker design. In addition to the weight of the titanium rod itself, it is also necessary to consider that a large amount of solid particles (such as activated carbon) entering the filter will cause activated carbon (such as sludge) to adhere to the titanium rod, resulting in an increase in pressure difference on the surface of the filter element to be blocked, thereby affecting the flux of the filter element, leading to an increase in pressure difference, and the force deformation of the porous plate causing the filter elements to collide with each other, etc. This will lead to the rupture of the interface of the titanium rod filter element, including the middle part.

4. The titanium rod filter is welded with a baffle at the inlet to avoid direct impact on the filter during the feeding process, otherwise it may cause loosening or collision between the filters.

5. When dealing with titanium rod filters, multiple support columns are installed around the periphery of the titanium rod filter, which are slightly longer than the titanium rod filter element, making it easy to place and shake during loading and unloading, and effectively protecting the titanium rod filter element from damage that is not visible to the naked eye.

6. When installing and using titanium rod filters, please carefully check whether the titanium rod filter components are intact and whether there are cracks. Insert the titanium rod into water using compressed air and observe for bubbles and cracks. After checking that there are no issues, install the titanium rod filter element on the porous plate.